Noise / Air pollution control comparisions with SpatFree 113
Anti Spatter and Flux for Welding - avoid welding spatters removal cleaning & get improved weld joint quality that is tested & passes load, bend, radiographic tests.
Manufacturer & Exporter
Noise / Air pollution control comparisions with SpatFree 113





• It provides dense and clean weld.

• It helps to get rid off the chipping and grinding operation to remove the spatters
so as to have a clean surface.

The second feature of this compound has become more pronounced because of its direct
impact in maintaining the clean environment at the work place in any industry. This has been
noticed by a number of senior executives from different industries particularly the ISO-14000
organizations. It is imperative for them to maintain the work place clean and for that; they
need to compromise on a number process/products, which are not environment friendly.
In these circumstances the use of SpatFree 113 helps to avoid a precarious situation
because of its anti spatter compound characteristic. It is advantageous since the absence of
chipping and grinding operation improves the environment of the working place reducing the
noise as well as dust pollution as shown under:-


Categories                        Noise pollution                                         Air pollution
                                                                                                         ( Concentration of SPM * )

Without coating             150 db (A) leq (8h) and above                    More than 1200 mg/m3

With coating of
SpatFree 113                  50 db (A) leq (8h) and below                       Upto 150 mg/m3

Permissible limit of
WHO for industries        Upto 75 db (A) leq (8h)                                Upto 200 mg/m3
                                                                                                          * Solid Particulate Matter

As is evident, it reduces the SPM (Solid Particulate Matter) concentration in the working
place from as high as 1200 mg/m3 to below 150 mg/m3 ; though the recommended level is
250 mg/m3 .To maintain the health standard in a workshop and to improve the environment
at the working place, WHO has stipulated a minimum level for noise and air pollution (as
shown above) beyond which it creates health hazards. The manual of ISO-14000 too
confirms this aspect.

HomeProduct FeaturesSpatFree - NozzleMetallurgical Aspects of SpatFree 113 Welding Anti Spatter and FluxNoise / Air pollution control comparisions with SpatFree 113Our ClientsLiterature DownloadVideo Download